problem about gitlab-Collection of common programming errors
yegomo
git gitlab
I push git to gitlab that hosted on my server, detail infos:git push -u origin master Counting objects: 225, done. Delta compression using up to 2 threads. Compressing objects: 100% (203/203), done. Writing objects: 100% (208/208), 805.41 KiB | 0 bytes/s, done. Total 208 (delta 55), reused 0 (delta 0) error: RPC failed; result=56, HTTP code = 0 fatal: The remote end hung up unexpectedly fatal: The remote end hung up unexpectedly Everything up-to-dateI have set git config –gl
swaroopsm
ruby-on-rails git gitlab
I had installed gitlab 6 a month ago, there was no problem and all was working fine, until recently it started showing me the following error, when I push into a newly created repository it gives me the following error:fatal: ‘/home/git/repositories/my_username/tester.git’ does not appear to be a git repository fatal: The remote end hung up unexpectedlyOutput of git remote -v is as follows:origin git@my_server.com:username/tester.git (fetch) origin git@my_server.com:username/tester.git (push)I
static
git apache ssh clone gitlab
When making:sudo git clone [email protected]:ws.gitI get an error:> sudo git clone [email protected]:root/ws.git Password: Cloning into ‘ws’. The authenticity of host ‘gitlab.mydomain.com (x.x.x.x)’ can’t be established. RSA key fingerprint is xx:xx:xx.xx:xx. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added ‘gitlab.mydomain.com,x.x.x.x’ (RSA) to the list of known hosts. [email protected]’s password: Permission denied, please try again. g
Caleb
git arch-linux server-setup gitlab
I’m trying to setup gitlab (6.5.1) on a fresh clean server. Everything appears to work, but git is unable to push to any project. Following the commands from the newly created project page and pushing to the remote via ssh gives:$ git push -u origin master fatal: Could not read from remote repository.Please make sure you have the correct access rights and the repository exists.This seems to be a fairly common problem. Unfortunately it seems to have a number of potential causes and none of them s
tftd
git gitlab
Context / InformationI installed gitlab on ubuntu 12.04 as described on this official page: https://github.com/gitlabhq/gitlabhq/blob/stable/doc/installation.mdAfter I installed, I was able to access the web interface at http://machine_ip:3000 with the credentials:[email protected]!feOn my machine, I have the following users: – git (that was set with no password as in the tutorial) – gitlab (set auto as in the tutorial) – my_username (the normal user used by me as root)In the web interface
gsc-frank
git push gitlab
When try to git push I got the following message:fatal: Could not read from remote repository.Please make sure you have the correct access rights and the repository exists.I can clone and pull from the remote. The remote is a GitLab private repo, so I must be authenticated to clone or pull so I suppose that key/auth problems can be discarded.I’m on GitLab 5.2.1EDITJust to add more info…That error happen just after a successful git clone on the cloned repo. Is not really rare??
chandank
git gitlab
I am having problem in getting my initial repo pushed to gitlabhq server using gilab-shell. Earlier I had setup gitlabhq (2.1) + gitolite that is working fine.ssh -T [email protected] Welcome to GitLab 5.2, Anonymous!But when I try to push anything git push -u origin master fatal: The remote end hung up unexpectedlyI checked across many answers in stackover flow and the issue list of gitlab but non of them seems to help me.https://github.com/gitlabhq/gitlab-shell/issuesGitLab v5.0 git push prob
Life of Madness
ruby gem centos gitlab centos5
I get this gitlab install error.Does anyone know why?log:[git@ictiy-01 gitlab]$ sudo -u git -H bundle install –deployment –without development test postgres aws Fetching source index from https://rubygems.org/ Using rake (10.1.0) Using i18n (0.6.9) Using minitest (4.7.5) Using multi_json (1.8.2) Using atomic (1.1.14) Using thread_safe (0.1.3) Using tzinfo (0.3.38) Using activesupport (4.0.2) Using builder (3.1.4) Using erubis (2.7.0) Using rack (1.5.2) Using rack-test (0.6.2) Using actionpack
shingo.nakanishi
ruby-on-rails git ssh gitlab
I installed gitlabI installed gitlab, after readinghttps://github.com/gitlabhq/gitlabhq/blob/master/doc/install/installation.md https://github.com/gitlabhq/gitlabhq/blob/master/doc/install/databases.md ERROR: Failed to build gem native extension (mysql2 on rails 3.2.3) http://ubuntuforums.org/showthread.php?t=2061057 add-apt-repository not foundI make repository in gitlab on browser, I set up ~/.ssh/config, and $ git push origin masterI got Erorr/usr/local/lib/ruby/2.0.0/net/http.rb:878:in `init
the Tin Man
ruby-on-rails ruby mysql2 gitlab
I have been trying to install Gitlab on my Ubuntu 12.04 server for a long time, and all goes well until I run bundle install.It says it is unable to install MySQL2 but gives no reason or corrective action.home/gitlab/gitlab$ sudo -u gitlab -H bundle install –deployment –without development test postgres Fetching gem metadata from http://rubygems.org/……. Fetching gem metadata from http://rubygems.org/.. Using rake (10.0.1) Using i18n (0.6.1) Using multi_json (1.3.7) Using activesupport (
Brij Raj Singh
mysql gitlab
My gitlab installation just won’t start, since the last restart.the mysqld.pid file is not there as well.131111 18:20:57 mysqld_safe Logging to ‘/opt/bitnami/mysql/data/mysqld.log’. 131111 18:20:57 mysqld_safe Starting mysqld.bin daemon with databases from /opt/bitnami/mysql/data 131111 18:20:58 mysqld_safe mysqld from pid file /opt/bitnami/mysql/data/mysqld.pid endedI looked into the mysqld.logtail -f mysql/data/mysqld.log 131111 18:30:24 InnoDB: Using Linux native AIO 131111 18:30:24 InnoDB:
Etienne
git debian gitlab
I’m using debian wheezy and would like to install git & gitlab on my serverI follow this tutoriel https://github.com/gitlabhq/gitlabhq/blob/master/doc/install/installation.md up to the step “install gems” where when I do sudo -u git -H bundle install –deployment –without development test postgres awsI get thisFetching source index from https://rubygems.org/ Using rake (10.1.0) Using i18n (0.6.9) Using minitest (4.7.5) Using multi_json (1.8.4)Gem::Installer::ExtensionBuildError: ERROR: Fail
sadmicrowave
ruby gem nokogiri gitlab libxslt
I recognize that this is a duplicate question however all the other answers I’ve found related to this issue have not seemed to help me…I’m installing GitLab and running through the gem dependencies when it hits the NokoGiri gem requirement and fails with the following info:ERROR: Error installing nokogiri: ERROR: Failed to build gem native extension./usr/local/bin/ruby extconf.rb extconf.rb:10:in `<main>’: Use RbConfig instead of obsolete and deprecated Config. extconf.rb:10:in `<ma
undur_gongor
ruby rubygems fedora gitlab
I am trying to install charlock holmes, nevertheless, I keep getting an error:[root@hugovm gitlab]# gem install charlock_holmes –version ‘0.6.9.4’ Building native extensions. This could take a while… ERROR: Error installing charlock_holmes:ERROR: Failed to build gem native extension./usr/bin/ruby extconf.rb checking for main() in -licui18n… yes checking for main() in -licui18n… yes checking for unicode/ucnv.h… yes– tar zxvf file-5.08.tar.gz– ./configure –prefix=/usr/local/share/gem
ternes3
mysql ruby-on-rails ruby gitlab
Hi I want to install Gitlab on Debian 7.0 when i want to install the bundle i get follor error by mysql2-0.3.11 root@v22013051598612672:/home/git/gitlab# gem install mysql2 -v ‘0.3.11’Fetching: mysql2-0.3.11.gem (100%)Building native extensions. This could take a while…ERROR: Error installing mysql2:ERROR: Failed to build gem native extension./usr/local/bin/ruby extconf.rbchecking for rb_thread_blocking_region()… yeschecking for rb_wait_for_single_fd()… yeschecking for mysql_query() in
HighTML
ruby-on-rails ruby gem gitlab powerpc
I’m trying to install GitLab on a Ubuntu PowerPC (mac mini) using sudo -u git -H bundle install –deployment –without development test postgres aws libv8 but installation fails on libv8 (3.11.8.17). Output is shown below. I am totally new on Ruby, but i guess it’s trying to install from binaries for a different architecture? How can i install from sources? Any help appreciated!Bundler version 1.3.5gem version 2.0.3ruby version 2.0.0p247 (2013-06-27) [powerpc-linux]uname Linux ubumini 3.2.0-53-
nekroze
git ubuntu redmine gitlab bitnami
I have searched around for solutions to this and tried various things however due to (from what i can gather) this being the less tred path, i have found nothing that works.I have installed gitlab and redmine using a Bitnami native install on ubuntu 12.04 server. It is pretty much just a self contained installation of everything needed for these web services. I chose this route as I had little success installing these services on their own for a bit and I got sick of leaving mess around my syste
Naveen Subramani
git gitlab bitnami gitlab-ci
I am trying to migrate my gitlab backups for my old server to new server. my old server has gitlab (gitlab-6.5.1-0) and my new server has gitlab version (gitlab 6.6.5-omnibus). i taken backup from my old server using the following command bundle exec rake gitlab:backup:create RAILS_ENV=productionand when i try to restore this backup in new server using this commandgitlab-rake gitlab:backup:restore BACKUP=1395394855I am getting the following outputUnpacking backup … done GitLab version mismatch
screenmutt
mysql ruby gitlab
i can read out all projects from gitlab server instance, but on adding a project to build, the database rolls back after insert with following log entries;(0.2ms) BEGIN Project Exists (0.4ms) SELECT 1 AS one FROM projects WHERE projects.name = BINARY ‘Namespace / project’ LIMIT 1 SQL (0.5ms) INSERT INTO projects (allow_git_fetch, always_build, created_at, default_ref, gitlab_id, gitlab_url, name, polling_interval, public, scripts, ssh_url_to_repo, timeout, token, updated_at) VALU
tftd
centos centos5 git gitolite gitlab
I have been trying to install GitLab on CentOS 5.x, but I am stuck now and google’s are confusing.I have been following this install guide (currently stuck here)After running bundle exec rake gitlab:app:status RAILS_ENV=production for the secund time I get this output:Starting diagnostic config/database.yml…………exists config/gitlab.yml…………exists /home/git/repositories/…………missing rake aborted! unexpected returnThe relevant part from /home/gitlab/gitlab/config/gitlab.yml is
AnP
ruby-on-rails ruby git gitlab
I’ve installed Gitlab 5, all ran smoothly until I attempted to make a test PUSH. The error is:remote: /usr/local/rvm/gems/ruby-2.0.0-p0/gems/bundler-1.3.5/lib/bundler/dsl.rb:33:in `eval_gemfile’: Gemfile syntax error: (Bundler::GemfileError) remote: /home/git/gitlab/Gemfile:14: syntax error, unexpected ‘:’, expecting $end remote: gem “mysql2”, group: :mysql remote: ^ I searched all over the internet (well, kind of), but mostly the answer is ab
Newben
git ssh gitlab
I have installed Gitlab in /home/myuser/gitlab. I created a rep test Following instructions, I added a remote git@localhost:root/testing.git I found that there was a problem with my ssh connect. Here’s my /home/myhome/.ssh/config file Host mylocalhost Hostname localhost User git IdentityFile /home/myuser/.ssh/id_rsaWhen I run git push -u origin master I am asked to enter my passphrase. But, immediately after I get this message Connection closed by ::1fatal: Could not read from remote repository
zentur
ruby-on-rails osx-mountain-lion gitlab
I’m trying to install Gitlab on an 10.8.2 Server but when I execute bundle exec rake gitlab:check RAILS_ENV=production I’m getting the following error.Checking Environment …gitlab user is in gitg group? … yes Has no “-e” in ~gitolite/.profile … yes Git configured for gitlab user? … yes Has python2? … yes python2 is supported version? … yesChecking Environment … Finished** Invoke gitlab:gitolite:check (first_time) ** Invoke environment ** Execute gitlab:gitolite:check Checking Gito
Michael Wild
ubuntu chef vagrant gitlab
I’m trying install this https://github.com/gitlabhq/gitlab-vagrant-vm dev environment for GitLab.When I follow installation instruction – I get following errors in terminal, on my ubuntu(x64) machine:[2013-04-14T22:59:27+00:00] ERROR: Running exception handlers[2013-04-14T22:59:27+00:00] ERROR: Exception handlers complete[2013-04-14T22:59:32+00:00] FATAL: Stacktrace dumped to /tmp/vagrant-chef-1/chef-stacktrace.out[2013-04-14T22:59:32+00:00] FATAL: NoMethodError: gem_package[rvm] (rvm::default l
Tobias Hourst
centos ssh centos6.4 gitlab
I have just installed Gitlab on my Centos 6.4. At first glance everything seems to be working fine but for some reason, I have the following issues…:Add a new project :(Similar issues when adding new SSH keys or listing projects members)Error: Can’t save project. Please try again later. Log: ActionView::Template::Error (undefined method `downcase’ for nil:NilClass): 1: – user = member.user 2: %li{id: dom_id(user), class: “team_member_row access-#{member.human_access.downcase}”} 3: .pull-right
mr.VVoo
ruby-on-rails gitlab
Last week i updated to GitLab 5.0. All previous existing projects are working fine when trying to edit them.Today i created a new one and everything also seemed to work fine. Then i wanted to add a member to my project and checked the settings page and everything i got was An Internal Server Error (500).The only log i’ve found was in production.log:Completed 500 Internal Server Error in 95msActionView::Template::Error (undefined method `heads’ for nil:NilClass):36: .input37:
Mario
git ssh gitolite ssh-keys gitlab
I stuck here now for like 2 Days a week.I’ve got a CentOs machine with Gitlab4 and gitolite. Everything worked fine for weeks, but suddenly last weekend something strange happend quite all binaries disappeared from the mashine ( like yum, python, ruby, mysql ect. ) i’ve really no clue how that can happn… After hours of reinstalling and compiling gitlab was working again.But i cant get the ssh keys between the gitlab and git user working. I already deleted and recreated the git user, set again
Bathakarai
git gitolite gitlab
I successfully download Gitolite file based on link instruction.. When I try to run gitolite/install -ln I get the following error:[root@Project1-CO mygit]# gitolite/install -ln error: unknown option `dirty=-dt’ usage: git describe [options] <committish>*–contains find the tag that comes after the commit –debug debug search strategy on stderr –all use any ref in .git/refs –tags use any tag in .git/refs/tags –long
Web site is in building