Alamofire/Alamofire

Alamofire is an HTTP networking library written in Swift.

Features

• [x] Chainable Request / Response methods
• [x] URL / JSON / plist Parameter Encoding
• [x] Upload File / Data / Stream
• [x] Download using Request or Resume data
• [x] Authentication with NSURLCredential
• [x] HTTP Response Validation
• [x] Progress Closure & NSProgress
• [x] cURL Debug Output
• [x] Comprehensive Unit Test Coverage
• [x] Complete Documentation

Requirements

• iOS 7.0+ / Mac OS X 10.9+
• Xcode 6.3

Communication

• If you need help, use Stack Overflow. (Tag ‘alamofire’)
• If you’d like to ask a general question, use Stack Overflow.
• If you found a bug, open an issue.
• If you have a feature request, open an issue.
• If you want to contribute, submit a pull request.

Installation

Embedded frameworks require a minimum deployment target of iOS 8 or OS X Mavericks.

To use Alamofire with a project targeting iOS 7, you must include all Swift files located inside the Source directory directly in your project. See the ‘Source File’ section for additional instructions.

CocoaPods

CocoaPods is a dependency manager for Cocoa projects.

CocoaPods 0.36 adds supports for Swift and embedded frameworks. You can install it with the following command:

$ gem install cocoapods

To integrate Alamofire into your Xcode project using CocoaPods, specify it in your Podfile:

source 'https://github.com/CocoaPods/Specs.git'
platform :ios, '8.0'
use_frameworks!

pod 'Alamofire', '~> 1.2'

Then, run the following command:

$ pod install

Carthage

Carthage is a decentralized dependency manager that automates the process of adding frameworks to your Cocoa application.

You can install Carthage with Homebrew using the following command:

$ brew update
$ brew install carthage

To integrate Alamofire into your Xcode project using Carthage, specify it in your Cartfile:

github "Alamofire/Alamofire" >= 1.2

Manually

If you prefer not to use either of the aforementioned dependency managers, you can integrate Alamofire into your project manually.

Embedded Framework

• Add Alamofire as a submodule by opening the Terminal, cd-ing into your top-level project directory, and entering the following command:

$ git submodule add https://github.com/Alamofire/Alamofire.git

• Open the new Alamofire folder, and drag the Alamofire.xcodeproj into the Project Navigator of your application’s Xcode project.

  It should appear nested underneath your application’s blue project icon. Whether it is above or below all the other Xcode groups does not matter.

• Select the Alamofire.xcodeproj in the Project Navigator and verify the deployment target matches that of your application target.

• Next, select your application project in the Project Navigator (blue project icon) to navigate to the target configuration window and select the application target under the “Targets” heading in the sidebar.

• In the tab bar at the top of that window, open the “General” panel.

• Click on the + button under the “Embedded Binaries” section.

• You will see two different Alamofire.xcodeproj folders each with two different versions of the Alamofire.framework nested inside a Products folder.

  It does not matter which Products folder you choose from, but it does matter whether you choose the top or bottom Alamofire.framework.

• Select the top Alamofire.framework for iOS and the bottom one for OS X.

  You can verify which one you selected by inspecting the build log for your project. The build target for Alamofire will be listed as either Alamofire iOS or Alamofire OSX.

• And that’s it!

The Alamofire.framework is automagically added as a target dependency, linked framework and embedded framework in a copy files build phase which is all you need to build on the simulator and a device.

Source File

For application targets that do not support embedded frameworks, such as iOS 7, Alamofire can be integrated by adding all the Swift files located inside the Source directory (Source/*.swift) directly into your project. Note that you will no longer need to import Alamofire since you are not actually loading a framework. Additionally, any of the calling conventions described in the ‘Usage’ section with the Alamofire prefix would instead omit it (for example, Alamofire.request becomes request), since this functionality is incorporated into the top-level namespace.

Usage

Making a Request

import Alamofire

Alamofire.request(.GET, "http://httpbin.org/get")

Response Handling

Alamofire.request(.GET, "http://httpbin.org/get", parameters: ["foo": "bar"])
         .response { (request, response, data, error) in
                     println(request)
                     println(response)
                     println(error)
                   }

Networking in Alamofire is done asynchronously. Asynchronous programming may be a source of frustration to programmers unfamiliar with the concept, but there are very good reasons for doing it this way.

Rather than blocking execution to wait for a response from the server, a callback is specified to handle the response once it’s received. The result of a request is only available inside the scope of a response handler. Any execution contingent on the response or data received from the server must be done within a handler.

Response Serialization

Built-in Response Methods

• response()
• responseString(encoding: NSStringEncoding)
• responseJSON(options: NSJSONReadingOptions)
• responsePropertyList(options: NSPropertyListReadOptions)

Response String Handler

Alamofire.request(.GET, "http://httpbin.org/get")
         .responseString { (_, _, string, _) in
                  println(string)
         }

Response JSON Handler

Alamofire.request(.GET, "http://httpbin.org/get")
         .responseJSON { (_, _, JSON, _) in
                  println(JSON)
         }

Chained Response Handlers

Response handlers can even be chained:

Alamofire.request(.GET, "http://httpbin.org/get")
         .responseString { (_, _, string, _) in
                  println(string)
         }
         .responseJSON { (_, _, JSON, _) in
                  println(JSON)
         }

HTTP Methods

Alamofire.Method lists the HTTP methods defined in RFC 7231 §4.3:

public enum Method: String {
    case OPTIONS = "OPTIONS"
    case GET = "GET"
    case HEAD = "HEAD"
    case POST = "POST"
    case PUT = "PUT"
    case PATCH = "PATCH"
    case DELETE = "DELETE"
    case TRACE = "TRACE"
    case CONNECT = "CONNECT"
}

These values can be passed as the first argument of the Alamofire.request method:

Alamofire.request(.POST, "http://httpbin.org/post")

Alamofire.request(.PUT, "http://httpbin.org/put")

Alamofire.request(.DELETE, "http://httpbin.org/delete")

Parameters

GET Request With URL-Encoded Parameters

Alamofire.request(.GET, "http://httpbin.org/get", parameters: ["foo": "bar"])
// http://httpbin.org/get?foo=bar

POST Request With URL-Encoded Parameters

let parameters = [
    "foo": "bar",
    "baz": ["a", 1],
    "qux": [
        "x": 1,
        "y": 2,
        "z": 3
    ]
]

Alamofire.request(.POST, "http://httpbin.org/post", parameters: parameters)
// HTTP body: foo=bar&baz[]=a&baz[]=1&qux[x]=1&qux[y]=2&qux[z]=3

Parameter Encoding

Parameters can also be encoded as JSON, Property List, or any custom format, using the ParameterEncoding enum:

enum ParameterEncoding {
    case URL
    case JSON
    case PropertyList(format: NSPropertyListFormat,
                      options: NSPropertyListWriteOptions)

    func encode(request: NSURLRequest,
                parameters: [String: AnyObject]?) ->
                    (NSURLRequest, NSError?)
    { ... }
}

• URL: A query string to be set as or appended to any existing URL query for GET, HEAD, and DELETE requests, or set as the body for requests with any other HTTP method. The Content-Type HTTP header field of an encoded request with HTTP body is set to application/x-www-form-urlencoded. Since there is no published specification for how to encode collection types, Alamofire follows the convention of appending [] to the key for array values (foo[]=1&foo[]=2), and appending the key surrounded by square brackets for nested dictionary values (foo[bar]=baz).
• JSON: Uses NSJSONSerialization to create a JSON representation of the parameters object, which is set as the body of the request. The Content-Type HTTP header field of an encoded request is set to application/json.
• PropertyList: Uses NSPropertyListSerialization to create a plist representation of the parameters object, according to the associated format and write options values, which is set as the body of the request. The Content-Type HTTP header field of an encoded request is set to application/x-plist.
• Custom: Uses the associated closure value to construct a new request given an existing request and parameters.

Manual Parameter Encoding of an NSURLRequest

let URL = NSURL(string: "http://httpbin.org/get")!
var request = NSURLRequest(URL: URL)

let parameters = ["foo": "bar"]
let encoding = Alamofire.ParameterEncoding.URL
(request, _) = encoding.encode(request, parameters: parameters)

POST Request with JSON-encoded Parameters

let parameters = [
    "foo": [1,2,3],
    "bar": [
        "baz": "qux"
    ]
]

Alamofire.request(.POST, "http://httpbin.org/post", parameters: parameters, encoding: .JSON)
// HTTP body: {"foo": [1, 2, 3], "bar": {"baz": "qux"}}

Caching

Caching is handled on the system framework level by NSURLCache.

Uploading

Supported Upload Types

Uploading a File

let fileURL = NSBundle.mainBundle()
                      .URLForResource("Default",
                                      withExtension: "png")

Alamofire.upload(.POST, "http://httpbin.org/post", file: fileURL)

Uploading w/Progress

Alamofire.upload(.POST, "http://httpbin.org/post", file: fileURL)
         .progress { (bytesWritten, totalBytesWritten, totalBytesExpectedToWrite) in
             println(totalBytesWritten)
         }
         .responseJSON { (request, response, JSON, error) in
             println(JSON)
         }

Downloading

Supported Download Types

Downloading a File

Alamofire.download(.GET, "http://httpbin.org/stream/100", destination: { (temporaryURL, response) in
    if let directoryURL = NSFileManager.defaultManager()
                          .URLsForDirectory(.DocumentDirectory,
                                            inDomains: .UserDomainMask)[0]
                          as? NSURL {
        let pathComponent = response.suggestedFilename

        return directoryURL.URLByAppendingPathComponent(pathComponent!)
    }

    return temporaryURL
})

Using the Default Download Destination

let destination = Alamofire.Request.suggestedDownloadDestination(directory: .DocumentDirectory, domain: .UserDomainMask)

Alamofire.download(.GET, "http://httpbin.org/stream/100", destination: destination)

Downloading a File w/Progress

Alamofire.download(.GET, "http://httpbin.org/stream/100", destination: destination)
         .progress { (bytesRead, totalBytesRead, totalBytesExpectedToRead) in
             println(totalBytesRead)
         }
         .response { (request, response, _, error) in
             println(response)
         }

Authentication

Authentication is handled on the system framework level by NSURLCredential and NSURLAuthenticationChallenge.

Supported Authentication Schemes

• HTTP Basic
• HTTP Digest
• Kerberos
• NTLM

HTTP Basic Authentication

let user = "user"
let password = "password"

Alamofire.request(.GET, "https://httpbin.org/basic-auth/\(user)/\(password)")
         .authenticate(user: user, password: password)
         .response {(request, response, _, error) in
             println(response)
         }

Authentication with NSURLCredential

let user = "user"
let password = "password"

let credential = NSURLCredential(user: user, password: password, persistence: .ForSession)

Alamofire.request(.GET, "https://httpbin.org/basic-auth/\(user)/\(password)")
         .authenticate(usingCredential: credential)
         .response {(request, response, _, error) in
             println(response)
         }

Validation

By default, Alamofire treats any completed request to be successful, regardless of the content of the response. Calling validate before a response handler causes an error to be generated if the response had an unacceptable status code or MIME type.

Manual Validation

Alamofire.request(.GET, "http://httpbin.org/get", parameters: ["foo": "bar"])
         .validate(statusCode: 200.. Serializer {
        return { (request, response, data) in
            if data == nil {
                return (nil, nil)
            }

            var XMLSerializationError: NSError?
            let XML = ONOXMLDocument(data: data, &XMLSerializationError)

            return (XML, XMLSerializationError)
        }
    }

    func responseXMLDocument(completionHandler: (NSURLRequest, NSHTTPURLResponse?, ONOXMLDocument?, NSError?) -> Void) -> Self {
        return response(serializer: Request.XMLResponseSerializer(), completionHandler: { (request, response, XML, error) in
            completionHandler(request, response, XML as? ONOXMLDocument, error)
        })
    }
}

Generic Response Object Serialization

Generics can be used to provide automatic, type-safe response object serialization.

@objc public protocol ResponseObjectSerializable {
    init?(response: NSHTTPURLResponse, representation: AnyObject)
}

extension Alamofire.Request {
    public func responseObject(completionHandler: (NSURLRequest, NSHTTPURLResponse?, T?, NSError?) -> Void) -> Self {
        let serializer: Serializer = { (request, response, data) in
            let JSONSerializer = Request.JSONResponseSerializer(options: .AllowFragments)
            let (JSON: AnyObject?, serializationError) = JSONSerializer(request, response, data)
            if response != nil && JSON != nil {
                return (T(response: response!, representation: JSON!), nil)
            } else {
                return (nil, serializationError)
            }
        }

        return response(serializer: serializer, completionHandler: { (request, response, object, error) in
            completionHandler(request, response, object as? T, error)
        })
    }
}

final class User: ResponseObjectSerializable {
    let username: String
    let name: String

    required init?(response: NSHTTPURLResponse, representation: AnyObject) {
        self.username = response.URL!.lastPathComponent
        self.name = representation.valueForKeyPath("name") as String
    }
}

Alamofire.request(.GET, "http://example.com/users/mattt")
         .responseObject { (_, _, user: User?, _) in
             println(user)
         }

The same approach can also be used to handle endpoints that return a representation of a collection of objects:

@objc public protocol ResponseCollectionSerializable {
    class func collection(#response: NSHTTPURLResponse, representation: AnyObject) -> [Self]
}

extension Alamofire.Request {
    public func responseCollection(completionHandler: (NSURLRequest, NSHTTPURLResponse?, [T]?, NSError?) -> Void) -> Self {
        let serializer: Serializer = { (request, response, data) in
            let JSONSerializer = Request.JSONResponseSerializer(options: .AllowFragments)
            let (JSON: AnyObject?, serializationError) = JSONSerializer(request, response, data)
            if response != nil && JSON != nil {
                return (T.collection(response: response!, representation: JSON!), nil)
            } else {
                return (nil, serializationError)
            }
        }

        return response(serializer: serializer, completionHandler: { (request, response, object, error) in
            completionHandler(request, response, object as? [T], error)
        })
    }
}

URLStringConvertible

Types adopting the URLStringConvertible protocol can be used to construct URL strings, which are then used to construct URL requests. NSString, NSURL, NSURLComponents, and NSURLRequest conform to URLStringConvertible by default, allowing any of them to be passed as URLString parameters to the request, upload, and download methods:

let string = NSString(string: "http://httpbin.org/post")
Alamofire.request(.POST, string)

let URL = NSURL(string: string)!
Alamofire.request(.POST, URL)

let URLRequest = NSURLRequest(URL: URL)
Alamofire.request(.POST, URLRequest) // overrides `HTTPMethod` of `URLRequest`

let URLComponents = NSURLComponents(URL: URL, resolvingAgainstBaseURL: true)
Alamofire.request(.POST, URLComponents)

Applications interacting with web applications in a significant manner are encouraged to have custom types conform to URLStringConvertible as a convenient way to map domain-specific models to server resources.

Type-Safe Routing

extension User: URLStringConvertible {
    static let baseURLString = "http://example.com"

    var URLString: String {
        return User.baseURLString + "/users/\(username)/"
    }
}

let user = User(username: "mattt")
Alamofire.request(.GET, user) // http://example.com/users/mattt

URLRequestConvertible

Types adopting the URLRequestConvertible protocol can be used to construct URL requests. NSURLRequest conforms to URLRequestConvertible by default, allowing it to be passed into request, upload, and download methods directly (this is the recommended way to specify custom HTTP header fields or HTTP body for individual requests):

let URL = NSURL(string: "http://httpbin.org/post")!
let mutableURLRequest = NSMutableURLRequest(URL: URL)
mutableURLRequest.HTTPMethod = "POST"

let parameters = ["foo": "bar"]
var JSONSerializationError: NSError? = nil
mutableURLRequest.HTTPBody = NSJSONSerialization.dataWithJSONObject(parameters, options: nil, error: &JSONSerializationError)
mutableURLRequest.setValue("application/json", forHTTPHeaderField: "Content-Type")

Alamofire.request(mutableURLRequest)

Applications interacting with web applications in a significant manner are encouraged to have custom types conform to URLRequestConvertible as a way to ensure consistency of requested endpoints. Such an approach can be used to abstract away server-side inconsistencies and provide type-safe routing, as well as manage authentication credentials and other state.

API Parameter Abstraction

enum Router: URLRequestConvertible {
    static let baseURLString = "http://example.com"
    static let perPage = 50

    case Search(query: String, page: Int)

    // MARK: URLRequestConvertible

    var URLRequest: NSURLRequest {
        let (path: String, parameters: [String: AnyObject]?) = {
            switch self {
            case .Search(let query, let page) where page > 1:
                return ("/search", ["q": query, "offset": Router.perPage * page])
            case .Search(let query, _):
                return ("/search", ["q": query])
            }
        }()

        let URL = NSURL(string: Router.baseURLString)!
        let URLRequest = NSURLRequest(URL: URL.URLByAppendingPathComponent(path))
        let encoding = Alamofire.ParameterEncoding.URL

        return encoding.encode(URLRequest, parameters: parameters).0
    }
}

Alamofire.request(Router.Search(query: "foo bar", page: 1)) // ?q=foo+bar&offset=50

CRUD & Authorization

enum Router: URLRequestConvertible {
    static let baseURLString = "http://example.com"
    static var OAuthToken: String?

    case CreateUser([String: AnyObject])
    case ReadUser(String)
    case UpdateUser(String, [String: AnyObject])
    case DestroyUser(String)

    var method: Alamofire.Method {
        switch self {
        case .CreateUser:
            return .POST
        case .ReadUser:
            return .GET
        case .UpdateUser:
            return .PUT
        case .DestroyUser:
            return .DELETE
        }
    }

    var path: String {
        switch self {
        case .CreateUser:
            return "/users"
        case .ReadUser(let username):
            return "/users/\(username)"
        case .UpdateUser(let username, _):
            return "/users/\(username)"
        case .DestroyUser(let username):
            return "/users/\(username)"
        }
    }

    // MARK: URLRequestConvertible

    var URLRequest: NSURLRequest {
        let URL = NSURL(string: Router.baseURLString)!
        let mutableURLRequest = NSMutableURLRequest(URL: URL.URLByAppendingPathComponent(path))
        mutableURLRequest.HTTPMethod = method.rawValue

        if let token = Router.OAuthToken {
            mutableURLRequest.setValue("Bearer \(token)", forHTTPHeaderField: "Authorization")
        }

        switch self {
        case .CreateUser(let parameters):
            return Alamofire.ParameterEncoding.JSON.encode(mutableURLRequest, parameters: parameters).0
        case .UpdateUser(_, let parameters):
            return Alamofire.ParameterEncoding.URL.encode(mutableURLRequest, parameters: parameters).0
        default:
            return mutableURLRequest
        }
    }
}

Alamofire.request(Router.ReadUser("mattt")) // GET /users/mattt

FAQ

When should I use Alamofire?

If you’re starting a new project in Swift, and want to take full advantage of its conventions and language features, Alamofire is a great choice. Although not as fully-featured as AFNetworking, Alamofire is much nicer to work with, and should satisfy the vast majority of networking use cases.

It’s important to note that two libraries aren’t mutually exclusive: AFNetworking and Alamofire can peacefully exist in the same code base.

When should I use AFNetworking?

AFNetworking remains the premiere networking library available for OS X and iOS, and can easily be used in Swift, just like any other Objective-C code. AFNetworking is stable and reliable, and isn’t going anywhere.

Use AFNetworking for any of the following:

• UIKit extensions, such as asynchronously loading images to UIImageView
• TLS verification, using AFSecurityManager
• Situations requiring NSOperation or NSURLConnection, using AFURLConnectionOperation
• Network reachability monitoring, using AFNetworkReachabilityManager
• Multipart HTTP request construction, using AFHTTPRequestSerializer

What’s the origin of the name Alamofire?

Alamofire is named after the Alamo Fire flower, a hybrid variant of the Bluebonnet, the official state flower of Texas.

Credits

Alamofire is owned and maintained by the Alamofire Software Foundation.

License

Alamofire is released under the MIT license. See LICENSE for details.