nvidia,13.04,suspend,resumeRelated issues-Collection of common programming errors
wvxvw
linux virtualbox drivers nvidia
My luck I had couple of older kernels, which work. The new kernel, probably somehow patched by VirtualBox fails to load. What fails is X-server, when it tries to start, here’s the log:[ 14.284] (II) LoadModule: “nvidia” [ 14.284] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so [ 14.285] (II) Module nvidia: vendor=”NVIDIA Corporation” [ 14.285] compiled for 4.0.2, module version = 1.0.0 [ 14.285] Module class: X.Org Video Driver [ 14.294] (EE) NVIDIA: Failed to
Hauke Laging
linux-mint nvidia resolution
I have just installed Linux Mint 14 and I cannot change the screen resolution. The appropriate resolution 1920 x 1200, just isn’t among the options.I have tried this solution but it reports:xrandr: cannot find output “VGA1″I have also tried this, but it reports:Fatal server error: Server is already active for display 0If this server is no longer running, remove /tmp/.X0-lockand start again. (EE) Please consult the The X.Org Foundation support at http://wiki.x.orgfor help. Edit1My graphics card
Kevdog777
xorg linux-mint kde nvidia monitors
When I quit windowed OpenGL applications, mainly LWJGL ones, I get a black screen for approximately two seconds. The screen doesn’t go in power save mode, it never shuts down: I can see the backlight on.I’m using Mint 14, on a GTX560Ti with NVIDIA driver 310.14, sync to vblank disabled, 75hz refresh rate (glxinfo here | xorg log here), on KDE 4.10.2 with KWin and oxygen-transparent theme. Disabling this theme does nothing.Tried glxgears. Closing it with the title bar button returns this:XIO: fat
ProtoSphere
linux debian nvidia optimus crunchbang
After installing Crunchbang 11 (based on Debian Wheezy) and booting up for the first time, I am forced into a shell as Xorg fails to start with Fatal server error: no screens found.My laptop has an Optimus based GT 720M. Nouveau was automatically installed during setup, and appears to be picking up the GPU to some extent:[ 126.101860] nouveau 0000:04:00.0: setting latency timer to 64 [ 126.101881] [drm] nouveau 0000:04:00.0: Detected an NVd0 generation card (0x0d7000a2) [ 126.105833] [drm] no
Thomas Versteeg
drivers debian nvidia xorg debian-wheezy
After I have installed the nVidia driver using this tutorial, and I try to startup it follows the bootsplash and when it’s about to load the gdm3 it first shows the tty screen for a second and then I see a white flickering _ symbol at the top left of the screen while the rest is black. I can press everything I want but it doesn’t change, even CTRL+ALT+F1.My laptop (Asus K53S) has a Geforce GT540M graphics card. And I just installed gnome-shell with gdm3 on Debian Wheezy. I used the following com
Patryk
drivers nvidia kernel xorg lowgraphics
Some time ago I have installed xorg edgers nvidia 331 drivers for my Nvidia 420M with Ubuntu 13.10. Today I have run like alwayssudo apt-get update && sudo apt-get upgrade -y && sudo apt-get dist-upgrade -yand after that my laptop always boots into low-graphics mode prompt to ask whether to troubleshoot the problem, check logs, etc. but even after marking boot into low graphics mode it never does (it hangs in x but i can still CtrlAltF1-6. I have uninstalled my graphics drivers a
user266903
nvidia nvidia-optimus bumblebee
I have been searching for a few weeks now (must have spent 30+ hours) and cannot get bumblebee to run for the life of me. Here’s what I do:run optirun firefox:and here’s my syslog and Xorg log:systlog:http://pastebin.com/PeDg7jJt[ 1057.427] X.Org X Server 1.14.5 Release Date: 2013-12-12 [ 1057.427] X Protocol Version 11, Revision 0 [ 1057.427] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu [ 1057.427] Current Operating System: Linux jaskarn-0 3.11.0-19-generic #33-Ubuntu SMP T
user1414721
12.04 nvidia log
I am running off a live CD as my Ubuntu 12.04 build cant load the desktop. Reading around I thought it was an issue with my nvidia drivers so I have reinstalled them. lightdm looks like its loading correctly no problem, when I turn it on it takes me directly to tty1 rather than the desktop – like it usually does. My log file (/var/log/Xorg.0.log) is:[ 345.667] X.Org X Server 1.12.3 Release Date: 2012-07-09 [ 345.672] X Protocol Version 11, Revision 0 [ 345.674] Build Operating System: Li
Amanda
drivers 13.10 nvidia xorg nouveau
I have Acer Aspire V3-772G laptop with NVIDIA GeForce GT 750M. I had a 13.04 with windows 8 until recently and all works fine. But when I try to install 13.10 from usb it crashes during boot. According to logs the reason is that nouveau driver doesn’t support my video card and therefore X server can’t start. So how can I replace nouveau driver in ISO image with proprietary NVIDIA driver?I tried to download 331.20 NVIDIA driver (.run), set up nomodeset and when the error occurred, I took these s
pumuckl007
drivers nvidia lenovo bumblebee
I installed bumblebee with nvidia-331. I expected optirun glmark2 to run glmark2 but I got an error.$ optirun glmark2[ 785.642896] [ERROR]Cannot access secondary GPU – error: [XORG] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please[ 785.642945] [ERROR]Aborting because fallback start is disabled.Lenovo Y410PVGA compatible controllers$ lspci | grep VGA00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06) 01
raaz
13.04 drivers xorg nvidia-optimus bumblebee
I’m on 13.4, optirun was working few days ago, and no more now.uname -aLinux bobby-OC 3.11.10-031110-generic #201311291453 SMP Fri Nov 29 19:54:20 UTC 2013 x86_64 x86_64 x86_64 GNU/Linuxpspci Intel and nVidia weel seens lspci | grep VGA00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GTX 660M] (rev ff)I’ve remove everythingsudo apt-get purge bumblebee* nvidia*and reinstal
charlie
installation partitioning 13.04
Scenario:Ubuntu 13.04 is already installed with seperate promary partitions for -UEFI Boot area /boot /home / swapAttempt to reinstall ubuntu 13.04 and in the partitioning options, select ‘something else’Problems:Although the existing partitions are shown, none have the filesystem format and mount point fields populated in the table. I sometimes am given the option of UEFI boot area partition, and sometimes I am not – leaving me with just the BIOS boot area partition option. Which partition/devi
user190334
13.04 radeon hp intel
I will start this thread like most of people. I am new guy in Ubuntu. I have tried to make right installation but always getting some problems. I have laptop HP Pavilion g7 1153er. This laptop equipped with ATI Radeon HD 6470M and i5 2410M CPU so I have hybrid graphic with Intel hd video 3000. I have took this laptop with Windows.But I am working with web-services and developement a lot so would like change my OS to Ubuntu. I have started with Ubuntu 12.04 and got that my system doesnt want to
pimeys
drivers nvidia nvidia-optimus bumblebee 13.04
I have a Asus Zenbook UX32VD laptop, using nVidia Optimus technology and having two graphics cards: one from Intel and one from nVidia.I’ve been running Ubuntu 13.04 happily for a month now using bumblebee’s optirun successfully. Today optirun suddenly didn’t work:? ~ optirun -vv glxgears [ 529.776886] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf [ 529.777578] [INFO]Configured driver: nvidia-304 [ 529.777895] [DEBUG]optirun version 3.1 starting… [ 529.777928] [DEBUG]Active configur
guntbert
installation grub2 dual-boot windows-7 13.04
I’m tring to install Ubuntu 13.04 on my PC desktop but when i restart my PC, it always starts Windows 7, without asking me which OS would i like to run. I’ve got 3 HDD on my PC:1: 200 GB with Win72: 500 GB partitioned with 4 GB of Swap, 150 GB of /home and the others GB of root (/)3: 2 TB of various data.I think the bootloader is on sda1, and during the installation of Ubuntu 13.04 I can’t install a bootloader on that partition (fatal error). What should i do?Here my log of fdisk:ubuntu@ubuntu:~
balachmar
drivers nvidia 13.04
I have an Asus UL30JT. It has Nvidia Optimus technology which I am not really interested in. I currently rarely use this laptop with it being connected to power. And I want to be able to play video at high res, play games and do some OpenCL coding.In the BIOS I switched it to NVIDIA only (non windows 7). Previously, this worked just fine, using the nvidia driver.After upgrading everything was broken. I have added nomodeset and blacklist.nouveau=1 as kernel options. The nvidia drivers install wit
shakabra
wireless networking 13.04 broadcom
My girlfriends computer recently upgraded to 13.04. I have another computer running Fedora, several android devices, and my friend was over earlier with his Mac. The computer running Ubuntu 13.04 causes every other device to have ~30-40% packet loss while pinging my router and 8.8.8.8. As soon as I diconnect her computer from the network all of the other devices begin functioning correctly; actually it’s not immediate; during tests the other devices report dropping the first one or two packets a
Seth
13.04 python-2.7
I decided to switch from Windows to Linux, so I installed Ubuntu Raring final beta.Unfortunately I have a Python problem.I was trying to use pip from a virtualenv I created, to install packages from a requirements.txt file like this: pip install -r requirements.txtI got the following error while a package was installing: buildutils/initlibzmq.c:10:20: fatal error: Python.h: No such file or directorycompilation terminated.error: command ‘x86_64-linux-gnu-gcc’ failed with exit status 1I found on i
iammilind
grub2 13.04 dual-boot bootloader
I have been using Ubuntu 13.04 as my primary OS for quite sometime on Sony VAIO laptop with other OS being windows 8 (never use it). Till today, everything was fine. In the evening I had shut down my PC and closed the lid; Typically I do this when the shutting down screen is still on. But probably this time it was fatal. (The only new thing I installed was video download plugin for Firefox & after that my Ubuntu was working fine till I shut down)When I again restarted my PC, now no menu is
Octavio Arriaga
installation grub2 ati 13.04 hybrid-graphics
This question is an exact duplicate of:I cant install Ubuntu 13.04 on a new computer1 answerI’am trying to install 13.04 via usb; however, when I boot to grub and press install Ubuntu, my screen will flash repeatedly between white and purple and will no proceed any further. So I pressed “e” in the “install Ubuntu” option and changed “quiet splash” to “quiet splash nomodeset” that made me able to recognize the colors in the typical installation process in Ubuntu, but everything seems to be piled
Braiam
suspend atheros wakeonlan
I’ve been trying to get WOL to work for weeks on my Ubuntu server 13.04 install but it just doesn’t seem to work. I notice when I suspend the server with “sudo pm-suspend” or via the desktop gui, the NIC card turns off. I.e., there is no blinking lights on the network port. I don’t know if that’s the issue but in my /var/log/syslog, I also saw that my ethernet was not one of the PCIs that had “system wakeup enabled by ACPI”:Oct 2 16:46:10 JAMFS1 kernel: [26462.745615] PM: suspend of devices com
user223945
12.04 suspend
Basically after waking up from a time out or from manually suspending, it gets very slow, to the point that it is impossible to even open a terminal on tty1-6.(edit: I’m referring to Unity or Gnome-Shell)Could this have anything to do with swap memory? My fstab is:proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda5 during installation UUID=bd4585c8-a303-4ce8-87f1-42737c6e9fd4 / ext3 errors=remount-ro 0 1 # /boot was on /dev/sda8 durin
Sil
13.10 power-management suspend screensaver mate
I’m having an issue with the MATE desktop.I installed it about 2 weeks ago, and there were seemingly no errors. It installed all of the required packages just fine and the desktop itself starts, and works, as intended. The problem I’m having deals with power settings.When I close the lid of my laptop, the default action is to put the computer into suspension. However, because suspension takes a while for my computer to go into, as well as halts any network interactions (since I have to download
user1299784
java multithreading resume suspend
I’ve looked at a number of threads but I haven’t found what I wanted so here goes:I’m writing a game in which a thread – GameThread – loops continuously, updating all my sprites, rendering them, and then sleeping for some time. I also have a custom-made Event handler which deals with key presses etc.This all works fine but I have a problem if an event is thrown while GameThread is rendering. On rare occasions, the handler that deals with the event may make a concurrent change that screws up the
shoosh
windows winapi process suspend
Using Win32 API it is only possible to suspend a single thread using SuspendThread() but not a complete process in one call. Iterating over a process threads and suspending them one at a time is not a good option since it may cause dead-locks and unexpected behavior.This is supposed to be something that is possible in kernel using a function from the DDK (which I don’t remember its name). How is it possible to expose this function to user mode?Is there any other way to achieve this without going
chue x
c# windows-8 windows-runtime lifecycle suspend
This question already has an answer here:Windows 8 Winrt Application goes to background or close2 answersHere’s an excerpt from a link I read:When the user moves an app to the background, Windows waits a few seconds to see whether the user immediately switches back to the app. If the user does not switch back, Windows suspends the app.If an app has registered an event handler for the Suspending | suspending event, this event handler is called right before the app is suspended.In my app code file
benc
windows-xp bluetooth hibernate suspend
Dell Lattitude E6410, 4GB ram, Windows XP SP3.I’ve had it for about 6 months, it has been very well behaved, no unexpected problems to speak off. Then suddenly, in the last three days, it froze twice on “Preparing to Standby” and then yesterday it froze on “Preparing for Hibernate”.The only solution was to fully power down and power up again. On on occasion, I saw a dialog box about the bluetooth driver. So I disabled it. Thus far, things seem to have gone back to normal.Is anyone familiar with
user236859
suspend
I have installed Ubuntu 12.04.3 on my laptop. A few minutes after putting the system to suspend, it wakes up automatically. tlp is installed on my system. I also have a usb keyboard and mouse connected to the laptop.The contents of /proc/acpi/wakeup are:-Device S-state Status Sysfs node P0P1 S4 *disabled KBD0 S3 *enabled pnp:00:07 PS2M S3 *disabled pnp:00:08 EHC1 S3 *enabled pci:0000:00:1d.0 EHC2 S3 *enabled pci:0000:00:1a.0 XHC S3 *enable
lilezek
java linux windows process suspend
I’m looking for a solution capable of doing this on Java:Spawn a process. Suspend it (like kill -STOP does in Linux). Continue a suspended process (like kill -CONT in Linux). Read/Write their standard input/output pipes at runtime. Working on (at least) Linux and Windows.As far as I know, the Java standar only implements first and fourth, but not the second neither the third.What could I do?
Peter
kernel usb power-management suspend
I’ve updated my HTPC from kernel 3.7.10 to 3.10.7 and it seems CONFIG_USB_SUSPEND is now gone from the kernel options and included in PM. The main problem I’m facing is that I have an external HDD and when suspending and waking up the HTPC, it isn’t available to the system. The HDD wakes up (you can hear it spin up again), but when you try to access the mount point you get the following error: ZOTAC ~ # ls /media ls: reading directory /media: Input/output errorAnd on dmesg:[ 253.278260] EXT4-fs
user1299784
java multithreading resume suspend
I’ve looked at a number of threads but I haven’t found what I wanted so here goes:I’m writing a game in which a thread – GameThread – loops continuously, updating all my sprites, rendering them, and then sleeping for some time. I also have a custom-made Event handler which deals with key presses etc.This all works fine but I have a problem if an event is thrown while GameThread is rendering. On rare occasions, the handler that deals with the event may make a concurrent change that screws up the
Yannis Rizos
interview career-development resume
I am about to be a new college grad and I am trying to get an internship or a jr software engineer position. However, I have no experience at all in the field. All I will have is my degree and my in class projects that I have completed. How can I make my resume more attractive so that I can get an interview? Also, how should I structure the details of my in class projects? Should I provide extensive detail? Any help is appreciated.
Niek
macbook-pro command-line python resume lid
I’ve been running a python script from the command line that’s inserting data in a database for a couple of hours now. It will take at least half a day more before it’s finished. However, I want to take the laptop with me to somewhere else. My sleep at closing lid settings (if they exist) are at default (I’ve never looked at them). If I close the lid and open it in 4 or 5 hours, will the python script resume from where it left off? If not, can this be set to work in the preferences somehow?
Mehrdad
resume
tl;dr: What is a less extreme (but still noticeable) alternative to the word “fluent”, when saying e.g. “I am fluent in C++/Python/whatever?”I think I can call myself “fluent” in C#, because I know the language and runtime very well, and I’m very familiar with the .NET framework’s APIs and classes, etc.I would like to claim the same thing for Python and C++. But while I can program in Python (I did so for an entire summer, making a website with Django), for example, I would not call myself fluen
Ben Brocka
terminology resume skills
My question is primarily concerned with making a CV.Normally under the Language section we list the individual programming Languages we’ve used. For example, C#, C++, PHP.Under the Platform section we can list the various operating systems and devices.Under which category would Web Services/Windows Services fall? My point is these are not platforms by themselves and surely they aren’t a language. Is there any common term that can be used to describe these?
Zds
android context resume
Give me a little guidance: as My Application is running with Broadcast Receiver and when ever my application in Background and any incoming event comes it triggers the my Application.Now we want as We are listening or playing some video file or browsing on Android Phone and with incoming event occur and my application launch(already running in Background), If i will ignore the event , we want to go back previous running task (Like browsing, playing video file application), How we can achieve?
Hu?nh Ng?c Bang
android activity resume runtimeexception
Who can help me review this bug, In my activity I startActivityForResult (used camera to take image). After taken photo, my activity can’t resume. :(java.lang.RuntimeException: Unable to resume activity {com.example/com.example.view.main.PersonActivity}: java.lang.RuntimeException: Failure delivering result ResultInfo{who=null, request=998, result=-1, data=null} to activity {com.example/com.example.view.main.PersonActivity}: java.lang.NullPointerException——— Stack trace ———android.ap
Korangar
android multithreading resume pausing-execution
I am making my first android game and I have a problem with my game thread. The thing is that when I pause it and press back or home button, I get an error. “the activity (in my app game) is not responding. My code: public class GameLoopThread extends Thread { static final long FPS = 10; private GameView view; private boolean running = false;private Object mPauseLock; private boolean mPaused;public GameLoopThread(GameView view) {this.view = view; }public void setRunning(boolean run) {running = r
menjaraz
image process resume suspend
Is there any way to suspend an application execution, store its process image to a file, and restore it later (keeping the application as it was at the moment of suspension)? What I want to do is something like an “hibernate” for applications on WinXP.Is there any application capable of doing this?What I have so far, is a virtualized system using vmware, where I can suspend and resume applications, but to accomplish the task, I have to suspend the whole virtualized system.Thank you in advance.
Avadhani Y
android cursor resume
I’ve got a lot of Cursor in my app and I’m trying to manage them clearly. I did as it’s explained in tutos : closing them at the end. But, on my Nexus S with ICS, when I’m resuming my app, I got crash 01-23 21:52:32.125: E/AndroidRuntime(14037): Caused by: android.database.StaleDataException: Attempted to access a cursor after it has been closed.I saw some answers on the internet saying that I should use LoaderManager to manage them but I’m not sure it’s adapted to my case. This is my functions
Web site is in building