-
XZS
networking drivers usb wifi firmware
I am searching for a WLAN USB adaptor that can be used as an Access Point as well as a mere client and in an AdHoc setup. It should support IEEE 802.11n and transmit rather fast (300Mbps).As I compile custom kernels for my machines, the driver should come as part of the current kernel (3.7.1 at the time of writing) and does not need to be built externally. If possible, I would even like to avoid installing external firmware. Driver and hardware should support power saving mode.Currently, I am us
-
November
osx hard-drive firmware
I have an imac(intel) that boots with a grey loading bar. The bar resets, reloads and then shuts down. It boots from the install disk fine, but will not go into SUM. I have tried to repair the disk with the install disk but am told this cant be done.I plan on reformatting the drive and reinstalling the os, however, I need to make sure the issue is actually a corrupt HD and not the firmware.
-
Jon
router wifi linksys firmware
I am looking into buying a Linksys WRT54G series to use as my router, DNS and Firewall.I would like to be able to share my internet connection with a couple of other small organisations too and have control over the management of such a service.Which of the firmware options is best suited for sharing connections and possibly boosting the signal in other offices?EDIT: There will probably be a maximum of approx. 25 people using the network at 1 time.OpenWRT, Tomato or DD-WRT
-
Kyle Brandt
linux raid pxeboot firmware adaptec
We’re running a 500GB RAID 1 on an Adaptec 2420SA – 2x500GB Hitachi Drives. It suddenly crashed and required a rebuild — was not even booting. It’s only at 66% after about a week. Very frustrated. This is the second box with the same card and drives that has had issues with the RAID/drives. Another box had this happen twice. Both machines are Linux boxes. CentOS and Fedora.I dunno if it’s the firmware — which currently needs an update (any help doing this over PXE would be great- I have used U
-
grgarside
macbook-pro hard-drive upgrade ssd firmware
I have successfully created a fusion drive using an 256GB Samsung 840 Pro and am loving it – but am experiencing (my first) system crashes (on my mac) ever since when I send my MBP to sleep. I read that upgrading the firmware of the SSD might help and found this description to do it: https://discussions.apple.com/thread/4863343. I depend on my machine being in a working state every day, so I need to be sure that the firmware upgrade will not destroy my file system (DXM05B0Q from http://www.samsu
-
Sauli
13.04 intel-wireless firmware
After upgrading to 13.04 the wifi usually fails to find a network and after a while the network manager crashes. After some digging it looks like the iwlwifi firmware version for my PC Intel WiFi Link 5100 adapter is wrong.sudo lshw -class networkshows that […] description: Wireless interface product: WiFi Link 5100 vendor: Intel Corporation […] configuration: broadcast=yes driver=iwlwifi driverversion=3.8.0-21-generic firmware=8.83.5.1 build 33692 ip=192.168.0.109 latency=0 link=yes multi
-
Matthew Murdoch
c++ arduino virtual-functions firmware
Following up on this comment from the question Writing firmware: assembly or high level?: When compiling C++ code for the Arduino platform, can you use virtual functions, exceptions, etc? Or would you want to (have to) use a subset of C++ (as described in the comment)?Any other caveats when programming for the Arduino platform?
-
Gilles
xorg drivers graphics backtrack firmware
I’ve just installed Backtrack 5 r3 (Gnome, 64bits) on my new machine but I am kind of facing a problem.I tried installing ATI driver, gparted, and libc for 32-bit support and I always seem to be getting a common error line with all of them:W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-2.fw formodule r8169 W: Possible missing firmware/lib/firmware/rtl_nic/rtl8168f-1.fw for module r8169What is this problem, and how can it be fixed?If you want more information, please make a commentED
-
studiohack
firmware
I want to extract firmware images and make some minor changes to it and remount is to my router via the FirmWare Modification Kit. Below you can see the errors that I get.# sudo ./extract_firmware.sh ~/Downloads/router_firmware_fullImage.bin ~/kamil/I’m getting:Firmware Mod Kit (extract) v0.69 beta, (c)2010 Jeremy Collake http://www.bitsum.com Checking for updates …You have the latest version of this kit. LINUX system detected. Compatibility ok. Testing file system of /home/user/kamil/ … Bui
-
Dean
iphone ios-4 restore firmware
I have a couple of iPhones running iOS 4 that I want to do a restore on. These phones have never been jailbroken, and I’m using the .ipsw that is the exact same version that’s currently on the phone:iPhone 4 – 4.3.5 (8L1)iPhone 3GS – 4.3.2 (8H7)When I try to restore from the .ipsw in Windows 7, I get the error:The iPhone “myphone” could not be restored. An unknown error occurred (3194).This error means that I need to upgrade iTunes, but I’m running the latest version. Also, I’m able to restore m
-
James Henstridge
acpi firmware
Here is an extract of results.log:MTRR validation. Test 1 of 3: Validate the kernel MTRR IOMEM setup. FAILED [MEDIUM] MTRRIncorrectAttr: Test 1, Memory range 0xc0000000 to 0xdfffffff (PCI Bus 0000:00) has incorrect attribute Write-Combining. FAILED [MEDIUM] MTRRIncorrectAttr: Test 1, Memory range 0xfee01000 to 0xffffffff (PCI Bus 0000:00) has incorrect attribute Write-Protect.====================================================================================================Test 1 of 1: Kernel l